Our BC-18 Micro Ball or BH-LR ball head mounted to our Multi-Clamp creates a rugged "go anywhere" ball and clamp package. The BC-18 Micro Ball can be mounted in the hole on the Multi-Clamp jaw, or use the included 3/8" to 1/4" reducer bushing to use the other holes. The BH-25 LR ball head can be mounted into any of the 3/8" sockets using the included 3/8" studs. Now you can mount your camera directly to poles, fences, tables, and more. There are five threaded holes in the Multi-Clamp: four 3/8"-16 threaded holes, and one 1/4"-20 threaded hole. Use these built-in sockets to mount the BC-18. Add the optional Flat Surface Adapters to securely mount the Multi-Clamp to flat surfaces.
FeaturesCNC machined 6061-T6 AluminumAnodized; Type II BlackFour threaded 3/8"-16 holesOne threaded 1/4"-20 holeOptional Flat Surface AdaptersIntuitive locking lever controlLocking lever's captive design never requires user adjustmentExtremely compact "go anywhere, fit anywhere" sizeFerritic Nitrocarburized Steel components for increased longevityIntegrated RRS quick-releaseRobust load capacityUltra-light weightFour 45 Degree drop-notches for 90 degrees of total adjustment *Does not feature traditional 90 degree drop-notch1/4"-inch tapped stem25mm diameter ball is hollowSingle drop notchCaptive knob and leverMain locking lever is spring-loaded; pull out to reposition in 60-degree increments. Lever freely clears tripod platform.Standard operation screw-knob style quick-release clamp