• Home
  • /
  • Nodal Slide with Integral Clamp | MPR-CL

Nodal Slide with Integral Clamp | MPR-CL



Nodal slide for most mirror-less/small camera + lens combos


The MPR-CL is a double dovetail rail with an integrated clamp. Use this as a balancing rail for your DSLR camera on our FH-350 Fluid Head, a nodal slide for our panorama gear, or as a platform for our flash rings with non-collared lenses.


  • Double dovetail rail accepts Arca-Type clamps on the top and bottom
  • Laser-engraved scale in 1mm increments on both sides for ease of repetition in setting your no-parallax point
  • Fixed clamp accepts left to right oriented plates, i.e. camera plates
  • Use as a nodal slide for most mirrorless and ultra-wide angle lens set-ups or when the no-parallax point is less than 3.3"/ 84mm from sensor
  • Use as a balancing rail for your DLSR on our FH-350 Fluid Head
  • Use as mounting rail for your RRS or Wimberley flash brackets
  • Specs

    1. Weight: 3.0oz/ 86g
    2. Height (not including knob): 0.6"/ 15mm
    3. Height (including knob): 0.8"/ 21mm
    4. Length: 5.7"/ 145mm
    5. Width: 1.5"/ 38mm

    In the Box

    1. (1) MPR-CL Rail
    2. (2) Safety Stop Screws
    3. (1) M2.5 hex key