Mini Clamp Package

SKU Mini-Clamp-Pkg
$110.00
(0) No Reviews yet
Back

Details

Mini-clamp package
Back

Overview

Back-to-back Screw-knob Mini-clamps, 38mm jaws
The Mini-clamp Package is to be used when you need a double-sided clamp (as when using our camera bars). Add this package to our camera bars, nodal slides or multi-purpose rails for a very versatile setup allowing you to mount lens plates, foot replacements, or camera plates.
Back

Features

  • The B2-FAB/mAS Package includes one each B2-FAB mini-clamp, B2-mAS mini-clamp, 1/4"-20 screw, and 5/32" hex key.
  • Clamps are mounted back to back.
  • Clamping orientation can be parallel or perpendicular. To swap the clamping orientation, simply loosen the screw (use included hex key) one full rotation, then pull clamps apart. Rotate 90 degrees, seat back together, and tighten the screw.
  • The simple, low profile design allows a collared lens or camera to be fixed in the top half of the clamp and still allow the Mini-clamp Package to slide fore-aft (lens) or side-to-side (camera) on our Multi-Purpose Rail or Camera Bar. This makes for an affordable focus rail/nodal point slide for collared lenses or a sliding stereo photography set-up.
    • Back

    Specs

    B2-mAS
  • Jaw Length: 1.5" / 38 mm
  • Width: 2.9" / 74 mm
  • Height: 0.6" / 15 mm
  • Weight: 2.3 oz / 64 g
    • B2-FAB
  • Jaw Length: 1.5" / 38 mm
  • Width: 2.9" / 74 mm
  • Height: 0.7" / 18 mm
  • Weight: 2.4 oz / 67 g
  • Height of Mini-Clamp Package: 1.2" / 30 mm
  • Weight of Mini-Clamp package: 4.8 oz / 137 g
    • Back

    In the Box

    (1) B2-mAS Screw-knob style quick-release clamp
    (1) B2-FAB Screw-knob style quick-release clamp with 1/4"-20" hole, 30mm (with alignment tabs)
    (1) Flat head screw, stainless steel, 1/4"-20 x 3/4"
    (1) 5/32" hex-key
    (1) User's guide

    Ratings & Reviews

    No reviews available

    Be the first to Write a Review