LCF-14 for Nikon 200-400mm f/4 VR & VR-II & some 300mm f/2.8 lenses
SKU: LCF-14
Some collared, telephoto lenses have a foot that can be removed. If your lens has this option, choose one of our foot replacements instead of a lens plate. A replacement foot with built-in-dovetail mounting will be lighter, lower in profile, and provide the best possible stability for your lens. Really Right Stuff foot replacements are precision machined from solid blocks of 6061-T6 aluminum and are fully compatible with 1.5" RRS Dovetail Standard. This foot replaces the Nikon lens collar foot on the Nikkor 200-400mm VR and VR-II, 300mm/f2.8 VR and VR-II lenses.
1. To remove the Nikon foot, use the M2.5 hex key tool that comes with the LCF-14 to completely remove the four Nikon mounting screws.
2. To install the LCF-14, use the four original Nikon M3 screws and secure the RRS foot to the lens collar.
3. If your mounting screws loosen over time, consider using a drop of Vibratite or Loctite 242 for better security.
Use one of our Long Lens Support Packages to stabilize your telephoto lenses and improve your shots.
1. To remove the Nikon foot, use the M2.5 hex key tool that comes with the LCF-14 to completely remove the four Nikon mounting screws.
2. To install the LCF-14, use the four original Nikon M3 screws and secure the RRS foot to the lens collar.
3. If your mounting screws loosen over time, consider using a drop of Vibratite or Loctite 242 for better security.
Use one of our Long Lens Support Packages to stabilize your telephoto lenses and improve your shots.
- (1) LCF-14 foot replacement
- (1) M2.5 hex key for M3 safety stop screws
- (2) M3 safety-stop screw
- (1) Replacement foot user's guide