The use of a strobe to supplement ambient light can solve many common problems for photographers afield. While the need for flash may be obvious in closeup and macro applications, the benefits of flash are less apparent when the main exposure is based on existing daylight, as the image below illustrates. In these situations, a strobe can be skillfully applied to…
Provide critical foreground "fill"
Add a "catchlight" in the eye of wildlife
“Fill” lighting is often necessary to reduce excessive contrast, and flash is the only practical solution to this problem. The need for adding fill light is obvious in portrait photography (people and animals). Less obvious is the need for flash fill to better balance a shaded foreground with a brighter background. Judicious use of gentle strobe fill can dramatically improve the image, compensate for narrow contrast ranges and extend the photographic possibilities.
A well-positioned strobe can also add that pleasing catchlight in the subject’s eyes, especially when lighting conditions are overcast, foggy, or backlit. Without an “eye spark”, the subject looks dead. Any strobe can be used to produce this critical catchlight if the strobe is always positioned atop the lens.
Use our flash brackets to deliver all these key benefits. Now the strobe can always remain atop the lens for pleasing shadow lines whether the camera is swiveled to horizontal or vertical.
Photographer Michael DeYoung is shooting product shots using the Really Right Stuff WPF-1 flash bracket for flash fill.
WPF-QR2 for Event & Location Shooting
This rugged unit is the most portable flash bracket on the market. Designed for use with shorter, non-collared lenses, this bracket mounts to the side dovetail of our L-plates (L-plate required; purchase separately). The bracket snaps into place and stays locked until the spring-loaded release button is pressed. Even with the heaviest flash, this bracket will never twist or come loose. The WPF-QR2 folds completely flat for compact storage in your camera bag. Learn more about the WPF-QR2 Flash Bracket.
B-Series for Telephoto Flash
Designed for use primarily with collared telephoto lenses, B-Series flash brackets are available in three sizes. Smaller telephotos can use a flash bracket with a smaller arc; larger telephotos need a flash bracket with a larger arc. These flash brackets are compatible with rails and plates from Really Right Stuff, Wimberley, and most Kirk plates. Brackets can also be used with full-size Wimberley head and side-mount action heads such as Wimberley Side-Kick, Kirk King Cobra, Mongoose heads and of course any Really Right Stuff gimbal head. Learn more about the B85-QR (small), the B87-QR (medium), or the B91-QR (large).
Mount Without Tools
All flash brackets feature a built-in quick-release clamp for tool-less mounting. Simply open the clamp and slide onto dovetail (rails for B-Series brackets must have double dovetail). Brackets precisely accept a Nikon or Canon “off-camera” strobe cord (other cords may fit, but may not seat flush). Buy our patented Snap QR adapters to fit Quantum Qflash, Nikon SB-R200 Speedlight Head, and Nikon SC-29 strobe cord. Our brackets are elegant, “no compromise” designs machined from solid 6061-T6 aluminum for lowest profile and minimum weight. Produced with pride here on the central coast of California.
B-Series Orbiting Tilt Flash Head
Orbiting flash head can be positioned anywhere along the hoop. Silky-smooth operation and positive detents allows flash head to snap into position on-the-go. Head permits forward and backward tilt up to 90° for better beam coverage in closeup work. Lock at any angle. Hoops are also reversible: mount with the hoop on the left, or with the hoop on the right. Remove the mount from the flash bracket and install in the opposite direction.