Orders for this item placed outside of the United States will default to UPS Worldwide Saver shipping (even if you select an alternate shipping method from the Submit Order page). If you require delivery by US Postal Service please contact us in advance.
This package includes one each TVC-24L, our extra-tall Versa Series 2 tripod, TA-2-LC leveling base with integrated quick release lever clamp, FH-350 fluid head and MPR-CL II rail. This complete video setup contains all the camera support equipment you need to begin producing professional-quality videos.
TVC-24L Versa series 2 Tripod
The TVC-24L is 14.4" (36.6cm) taller than our standard-height TVC-23 tripod at full extension. The extra height is ideal for very tall photographers, for use on uneven terrain or for situations that call for extra high support. Versa series 2 tripods are the perfect choice for all mid-size gear combos. They’re built for rock solid support of 300mm telephotos, gimbal heads, and pro size cameras, but their incredibly light weight also makes them easy to carry and use with all gear.
FH-350 Fluid Head
The FH-350 fluid head was designed with the highly desirable features found in larger, top tier fluid heads in a compact package better suited for smaller video camera systems like DSLRs and other similar size units .
MADE IN THE USA
Down to the smallest screw.
TVC-24L Versa Series 2 Tripod
Patented SureGrip Apex Lock System: Allows quick and absolutely secure change-out from a simple platform to a Versa Quick Column or Series 2 Leveling Base.
Big & Thin carbon fiber legs: With a large outer diameter and wall thickness of only 0.04", our carbon fiber tubes far surpass the competition in strength-to-weight ratio.
Offset Leg Joints: Tripods must occasionally withstand tremendous bending and torsion loads. It is crucial that the leg angle stops and all other structural joints are well supported. Our patented offset leg joints fully support the leg angle stops allowing loads to be transferred straight through the strongest members of the tripod. This also means the tripod is more compact when collapsed.
Ratcheting Angle Stops: just pull out the stop, raise the leg, and the stop will automatically engage into place beginning at the highest setting. Pulling the legs back down will ratchet the stop into place at each angle. This keeps your fingers safe from pinching and assures the best support.
Rubber Ball Feet: Large diameter teardrop shape keeps leg sidewalls from touching the ground even at the lowest settings and makes positive contact with the ground at virtually any angle.
CNC Machining: Computer Numerical Controlled (CNC) milling machines precisely sculpt parts out of solid metal affording excellent control in the design, fit and finish of every metal part found on an RRS tripod. Other tripod manufacturers employ mold casting to mass produce metal parts, resulting in lower strength/quality pieces.
Anodizing vs Powder Coating: Anodizing produces surface protection embedded into the metal, yielding superior wear and corrosion resistance versus a superficial coating.
High-visibility bulls-eye spirit level embedded in the apex for accurate leveling.
Twist Grip Leg Extension Locks: Textured semi-hard rubber allows for easy adjustments and strong grip. Anti-twist leg sections mean each twist lock can be operated independently.
FH-350 Fluid Head
True sinusoidal counterbalance system with infinite adjustability within its weight capacity
4-levels of fluid damping (Off, Low, Medium, High) on both pan and tilt
180 degree tilt range
Independent Pan and Tilt controls are ergonomic, tactilely unique and positioned on the same side for ease and speed
Tilt Control Handle permits infinite angle positioning within its 90 degree adjustment range using a patent-pending multi-disk clutch lock; no more sharp-toothed rosettes to scrape your hands on or wear out
Fore-aft adjustability using the included MPR-CL II rail allows the camera/lens balance point to be perfectly centered
Precision panning base and tilt housing are finely laser-engraved at 2.5 degree intervals and incorporate multiple ball bearing assemblies for effortless panning and tilting
Patented lever-release clamp for fast & easy mounting
Laser-engraved millimeter scales on the Lever-Release Clamp Jaws offer precise centering and positioning of the camera and lens optimal balance
Integrated male dovetail in panning base mates with Lever-Release clamp on the leveling base for quick set-up/take-down
High-visibility 15mm bulls-eye spirit level embedded in the Panning Base for accurate leveling
All components are of the finest Really Right Stuff quality, machined from solid aircraft aluminum, stainless steel and brass for maximum durability and minimum weight
(2) 1/4"-20 accessory mounting sockets left side surface
TA-2-LC Leveling Base
Patented Lever-Release clamp mates with the integrated male dovetail on the bottom of the FH-350 Fluid Head.
Holds up to 35 lbs. without slipping.
Low friction polymer anti-jam plate secures your head solidly and accentuates vibration damping for your load.
Delivers 15° of leveling capability.
Large 15mm diameter bullseye level is easy to see.
Textured rubber grip on bottom of handle is easy to grasp firmly with or without gloves. Handle includes a removable hook to hang bags/extra weight to increase total support system inertia
MPR-CL II Rail
Integrated quick-release clamp on the end of a machined RRS dovetail rail
Integrated 15mm spirit level
Laser-engraved mm scale on both sides
Ideal for fore-aft positioning for weight balance or centering the lens no-parallax point at the axis of rotation
What's in the Box?
TVC-24L Carbon Fiber Tripod
(2) 3/16" hex keys (required to adjust leg angle tension)
1/8" hex key (required to loosen/tighten SureGrip set screws)
Single-use tube of medium-strength thread-locking compound (if user desires to semi-permanently fix tripod feet in place)
FH-350 Fluid Head
TA-2-LC Leveling Base
MPR-CL II Rail
Nylon stud-cover nut
FH-350 Head, Tripod and Series 2 Leveling Base User's Guides
Load Capacity: 10 lb / 5.9kg
Weight: 8.9 lb / 4040g
Maximum Height with Fluid Head: 74.5" / 189cm
Minimum Height with Fluid Head: 12.1" / 309mm
Folded Length with Fluid Head: 31.4" / 798mm
Leg material: Carbon Fiber
Number of Leg Sections: 4
Load Capacity: 40 lb / 18kg
Max Height: 66.1" / 168cm
Minimum Height: 3.7" / 95mm
Folded Length: 23.0" / 584mm
Weight: 3.7 lb / 1692g
FH-350 Fluid Head Specs:
Counterbalance Capacity*: 10 lb / 4.5kg
Sinusoidal Restoring Torque: 8-50 inch-pounds
Height: 5.9" / 150mm
Tripod Mount: 3/8"-16
Weight: 4.3 lb / 1939g
*Counterbalance capacity measured at 5" (127mm) above Tilt Axis. Maximum weight supported is 50 lb, but loads weight above 10 lb will have increasingly diminished counterbalance support.
Load Capacity: 35 lb / 15.8kg
Added height to Versa Series 2 tripods: 2.5" / 63mm
Integrated Lever-Release Clamp
Spirit Level: 15mm diameter
Weight: 14.4 oz / 409g
Videography with DSLR size camera gear
Wildlife & Sports photography with super-telephoto lenses
What else do I need?
RRS-compatible Quick Release Plates for your camera and tripod-collared lenses