TVC-32G Versa Series 3 Ground Tripod

SKU: TVC-32G
$475.00 to $690.00

Out of Stock, Backorder OK

The TVC-32G is our ground-height Versa Series 3 tripod. Conservatively rated to hold 50 pounds, the TVC-32 weighs only 2.5 pounds, is 13.75 inches tall and collapses to a mere 10 inches. All of the reliability, CNC-precision and beautiful craftsmanship that make RRS tripods coveted around the world are built into the Versa Series 3 tripods. The apex's large diameter accepts Really Right Stuff's 75mm video bowl and leveling base accessories. An extra wide apex-to-leg joint with CNC machined pivot bearings provides high torsional rigidity for solid video panning. Supporting 50 pound loads with the legs fully collapsed and splayed, the Versa Series 3 tripods have the highest stiffness-to-load ratio of all RRS carbon fiber tripods.
  • Patented SureGrip Apex Lock System: Allows quick and absolutely secure change-out from a simple platform to a Versa Quick Column or Series 3 Leveling Base.
  • Offset Leg Joints: Tripods must occasionally withstand tremendous bending and torsion loads. It is crucial that the leg angle stops and all other structural joints are well supported. Our patented offset leg joints fully support the leg angle stops allowing loads to be transferred straight through the strongest members of the tripod. This also means the tripod is more compact when collapsed.
  • Ratcheting Angle Stops: just pull out the stop, raise the leg, and the stop will automatically engage into place beginning at the highest setting. Pulling the legs back down will ratchet the stop into place at each angle. This keeps your fingers safe from pinching and assures the best support.
  • Rubber Ball Feet: Large diameter teardrop shape keeps leg sidewalls from touching the ground even at the lowest settings and makes positive contact with the ground at virtually any angle.
  • Anodizing vs Powder Coating: Anodizing produces surface protection embedded into the metal, yielding superior wear and corrosion resistance versus a superficial coating.
  • Bulls-eye spirit level
  • Twist Grip Leg Extension Locks: Textured semi-hard rubber allows for easy adjustments and strong grip. Anti-twist leg sections mean each twist lock can be operated independently.
  • TVC-32G with Platform:
  • TVC-32G Carbon Fiber Tripod
  • (2) 3/16 hex keys (required to adjust leg angle tension)
  • 1/8" hex key (required to loosen/tighten SureGrip set screws)
  • Single-use tube of medium-strength thread-locking compound (if user desires to semi-permanently fix tripod feet in place)
  • Nylon stud-cover nut
  • User's Guide


  • TVC-32G with TA-3-LB:
  • TVC-32G Carbon Fiber Tripod
  • TA-3 Leveling Base
  • (2) 3/16 hex keys (required to adjust leg angle tension)
  • 1/8" hex key (required to loosen/tighten SureGrip set screws)
  • Single-use tube of medium-strength thread-locking compound (if user desires to semi-permanently fix tripod feet in place)
  • Nylon stud-cover nut
  • User's Guide


  • TVC-32G with TA-3-LB-HK:
  • TVC-32G Carbon Fiber Tripod
  • Leveling base with 4.5" handle and hook (leveling base replaces the platform)
  • (2) 3/16 hex keys (required to adjust leg angle tension)
  • 1/8" hex key (required to loosen/tighten SureGrip set screws)
  • Single-use tube of medium-strength thread-locking compound (if user desires to semi-permanently fix tripod feet in place)
  • Nylon stud-cover nut
  • User's Guide


  • TVC-32G with TA-3-LB-LP:
  • TVC-32G Carbon Fiber Tripod
  • Leveling base with low profile knob (leveling base replaces the platform)
  • (2) 3/16 hex keys (required to adjust leg angle tension)
  • 1/8" hex key (required to loosen/tighten SureGrip set screws)
  • Single-use tube of medium-strength thread-locking compound (if user desires to semi-permanently fix tripod feet in place)
  • Nylon stud-cover nut
  • User's Guide


  • TVC-32G with TA-3-LC:
  • TVC-32G Carbon Fiber Tripod
  • Leveling base with 2.5" handle and lever release clamp (leveling base replaces the platform)
  • (2) 3/16 hex keys (required to adjust leg angle tension)
  • 1/8" hex key (required to loosen/tighten SureGrip set screws)
  • Single-use tube of medium-strength thread-locking compound (if user desires to semi-permanently fix tripod feet in place)
  • Nylon stud-cover nut
  • User's Guide


  • TVC-32G with TA-3-LC-HK:
  • TVC-32G Carbon Fiber Tripod
  • Leveling base with 4.5" handle with hook and a lever release clamp (leveling base replaces the platform)
  • (2) 3/16 hex keys (required to adjust leg angle tension)
  • 1/8" hex key (required to loosen/tighten SureGrip set screws)
  • Single-use tube of medium-strength thread-locking compound (if user desires to semi-permanently fix tripod feet in place)
  • Nylon stud-cover nut
  • User's Guide


  • TVC-32G with TA-3-LC-LP:
  • TVC-32G Carbon Fiber Tripod
  • (2) 3/16 hex keys (required to adjust leg angle tension)
  • 1/8" hex key (required to loosen/tighten SureGrip set screws)
  • Single-use tube of medium-strength thread-locking compound (if user desires to semi-permanently fix tripod feet in place)
  • Nylon stud-cover nut
  • User's Guide
  • TVC-32G with Platform:
  • Leg Material: Carbon Fiber
  • Number of Leg Sections: 2
  • Load Capacity: 50 lb / 23kg
  • Maximum Height: 13.75" / 34.9cm
  • Minimum Height: 2.9" / 75mm
  • Folded Length: 10.1" / 25.7mm
  • (Heights and Length exclude 0.313" / 8mm stud height)
  • Video Bowl Compatibility: 75mm
  • Weight with Platform: 2.5 lb / 1.1kg


  • TVC-32G with TA-3-LB:
  • Leg Material: Carbon Fiber
  • Number of Leg Sections: 2
  • Load Capacity: 50 lb / 23kg
  • Maximum Height: 13.75" / 34.9cm
  • Minimum Height: 4.9" / 124mm
  • Folded Length: 10.1" / 25.7mm
  • (Heights and Length exclude 0.313" / 8mm stud height)
  • Video Bowl Compatibility: 75mm
  • Weight with Platform: 3.2 lb / 1.4kg


  • TVC-32G with TA-3-LB-HK:
  • Leg Material: Carbon Fiber
  • Number of Leg Sections: 2
  • Load Capacity: 50 lb / 23kg
  • Maximum Height: 13.75" / 34.9cm
  • Minimum Height:6.7" / 170mm
  • Folded Length: 10.1" / 25.7mm
  • (Heights and Length exclude 0.313" / 8mm stud height)
  • Video Bowl Compatibility: 75mm
  • Weight with Platform: 3.3 lb / 1.5kg


  • TVC-32G with TA-3-LB-LP:
  • Leg Material: Carbon Fiber
  • Number of Leg Sections: 2
  • Load Capacity: 50 lb / 23kg
  • Maximum Height: 13.75" / 34.9cm
  • Minimum Height:2.9" / 75mm
  • Folded Length: 10.1" / 25.7mm
  • (Heights and Length exclude 0.313" / 8mm stud height)
  • Video Bowl Compatibility: 75mm
  • Weight with Platform: 3.1 lb / 1.1kg


  • TVC-32G with TA-3-LC:
  • Leg Material: Carbon Fiber
  • Number of Leg Sections: 2
  • Load Capacity: 50 lb / 23kg
  • Maximum Height: 14.2" / 35.3cm
  • Minimum Height: 4.9" / 124mm
  • Folded Length: 10.1" / 25.7mm
  • (Heights and Length include LR Clamp)
  • Video Bowl Compatibility: 75mm
  • Weight with Platform: 3.5 lb / 1.6kg


  • TVC-32G with TA-3-LC-HK:
  • Leg Material: Carbon Fiber
  • Number of Leg Sections: 2
  • Load Capacity: 50 lb / 23kg
  • Maximum Height: 13.75" / 34.9cm
  • Minimum Height: 6.7" / 170mm
  • Folded Length: 10.1" / 25.7mm
  • (Heights and Length Include LR Clamp)
  • Video Bowl Compatibility: 75mm
  • Weight with Platform: 3.6 lb / 1.7kg


  • TVC-32G with TA-3-LC-LP:
  • Leg Material: Carbon Fiber
  • Number of Leg Sections: 2
  • Load Capacity: 50 lb / 23kg
  • Maximum Height: 13.75" / 34.9cm
  • Minimum Height: 2.9" / 75mm
  • Folded Length: 10.1" / 25.7mm
  • (Heights and Length exclude 0.313" / 8mm stud height)
  • Video Bowl Compatibility: 75mm
  • Weight with Platform: 3.4 lb / 1.5kg