Stainless reducer bushing, 3/8"-16 to 1/4"-20

SKU: Bushing
$5.00

In Stock

Most clamps have one centralized 3/8"-16 mounting socket. For those who wish to mate to a 1/4"-20 stud, we offer a custom stainless steel reducer bushing that screws into the clamp's socket. This reduces the socket size from 3/8-inch to 1/4-inch.



To prevent the bushing from backing out or rotating, secure ("glue in place") with Loctite type 242 (blue fluid; non-permanent) threadlocking liquid. Put a drop of the blue fluid in the 3/8-ths socket, then thread the bushing in (wipe off any excess). Orient bushing with screwdriver slot facing out (to aid removal, if needed). Allow to cure for a few hours before using. Buy Loctite 242 at any auto parts or hardware store. The blue fluid is non-permanent.
  • Flathead screwdriver slot allows for easy installation, positioning, and aids in removal if needed
    1. (1) Stainless steel reducer bushing
  • Outer threading: 3/8"-16
  • Inner threading: 1/4"-20
  • Weight: 1g