Series 2 Support Packages
SKU: Series 2 Support Packages
A Really Right Stuff ballhead is the best choice for all general photography. It gives you solid support and delivers fast and accurate control of your camera. Horizon leveling and aiming can be accomplished in one instinctive motion, and rigid lockup takes just a quick twist of the control knob. Our ballheads are faster to use and inherently more stable than 3-axis pan-tilt tripod heads. Since the ballhead profile is smaller and lacks the protruding handles, they are also much easier to carry and pack. The BH-40 LR and BH-55 LR features our patented lever-release style quick-release clamp for optimum speed and security.
Patented SureGrip Apex Lock System: Allows quick and absolutely secure change-out from a simple platform to a Versa Quick Column or series 2 Leveling Base. Offset Leg Joints: Tripods must occasionally withstand tremendous bending and torsion loads. It is crucial that the leg angle stops and all other structural joints are well supported. Our patented offset leg joints fully support the leg angle stops allowing loads to be transferred straight through the strongest members of the tripod. This also means the tripod is more compact when collapsed. Ratcheting Angle Stops: Just pull out the stop, raise the leg, and the stop will automatically engage into place beginning at the highest setting. Pulling the legs back down will ratchet the stop into place at each angle. This keeps your fingers safe from pinching and assures the best support. Rubber Ball Feet: Large diameter teardrop shape keeps leg sidewalls from touching the ground even at the lowest settings and makes positive contact with the ground at virtually any angle. Anodized, Type 3 Black Twist Grip Leg Extension Locks: Textured semi-hard rubber allows for easy adjustments and strong grip. Anti-twist leg sections mean each twist lock can be operated independently.
Patented lever-release clamp for fast & easy mounting Ergonomic design gives superior handling and unsurpassed reliability Lowest height profile in its class Large main locking knob incorporates stainless steel ball bearings for a lifetime of silky smooth control Dual drop-notches allow maximum flexibility for positioning the camera for portrait-orientation or extreme angle shots Micrometer drag tension adjustment is repeatable and absolutely reliable Precision panning base is finely laser-engraved at 2.5 degree intervals and features our unique drum & brake design for effortless locking Laser-engraved millimeter scale offers precise centering and positioning within the clamp jaw
Tripod, Head, Panning Clamp, Bags
Carbon Fiber Tripod (select TVC-23, TVC-24, or TVC-24L above) (2) 3/16" hex keys (required to adjust leg angle tension) 1/8" hex key (required to loosen/tighten SureGrip set screws) Single-use tube of medium-strength thread-locking compound (if user desires to semi-permanently fix tripod feet in place) Nylon stud-cover nut Ballhead (select BH-55 or BH-40 above) PC-LR Panning Clamp - only if selected Padded Cordura pouch with drawstring closure 5/32" hex key (required to remove/replace clamp) - only if PC-LR is selected 1/4"-20 x 3/4" stainless steel flat head mounting screw Tripod bag (select TQB-64, TQB-72, or none above) User's Guide(s)
Leg Material: Carbon Fiber Number of Leg Sections: 3 Load Capacity: 40 lb / 18kg Maximum Height: 52.6" / 134cm Minimum Height: 3.7" / 95mm Folded Length: 23.9" / 606mm (Heights and Length exclude 0.313" / 8mm stud height) Weight: 3.3 lb / 1502gTVC-24 Leg Material: Carbon Fiber Number of Leg Sections: 4 Load Capacity: 40 lb / 18kg Maximum Height: 49.4" / 125cm Minimum Height: 3.4" / 86mm Folded Length: 19.1" / 486mm (Heights and Length exclude 0.313" / 8mm stud height) Weight: 3.3 lb / 1515gTVC-24L: Leg Material: Carbon Fiber Number of Leg Sections: 4 Load Capacity: 40 lb / 18kg Maximum Height: 66.1" / 168cm Minimum Height: 3.7" / 95mm Folded Length: 23.0" / 584mm (Heights and Length exclude 0.313" / 8mm stud height) Weight: 3.7 lb / 1692gBH-40:BH-40 Ballhead - No Clamp: Load Capacity: 18 lb / 8 kg Height: 2.5" / 64 mm Base Diameter: 2.1" / 53 mm Ball Diameter: 1.6" / 40 mm Tripod Mount: 3/8"-16 socket (stud no taller than 3/8") Weight: 13 oz / 369 gBH-55:BH-55 Ballhead - No Clamp: Load Capacity: 50 lb / 23 kg Height: 3.5" / 89 mm Base Diameter: 2.9" / 74mm Ball Diameter: 2.2" / 55mm Tripod Mount: 3/8"-16 Weight: 1.6 lb / 726gTQB-64: External Length: 26.5" / 67cm Maximum Internal Length: Approximately 25" / 63.5cm Maximum Internal Diameter: Approximately 4.3" / 11cm Weighs 16.4 oz / 465gTQB-72: External Length: 31.5" / 80cm Maximum Internal Length: Approximately 28" / 72cm Maximum Internal Diameter: Approximately 4.7" / 12cm Weighs 20.5 oz / 580g