Most Nikon and Canon off-camera strobe cords seat perfectly on any Really Right Stuff flash bracket or flash extender. But some cords, strobes, and flash units require an adapter to ensure a non-twist fit.
Nikon SC-29 strobe cord
The footprint of the SC-29 strobe cord is broader than the standard SC-28 cord (SC-28 cord does not require an adapter). Use our FA-QR29 adapter for a perfect fit.
FA-QR-Q2 adapter for T4d/T5d/T5d-R
The base of these flash units is angled and requires an adapter. Use either FA-Q1 or FA-Q2 adapter.
Nikon SB-R200 Speedlights
Use our FA-R200 adapter to mount your SB-R200 Speedlight Head onto any Really Right Stuff flash bracket instead of using the Nikon SX-1 Attachment Ring (this is the ring that comes with R1 & R1C1 Systems). One key advantage to using our flash brackets rather than the SX-1 ring is the ability to make fore/aft and radial adjustments to the position of the strobes (particularly when used with FA-EX1 extenders).
Lens Plates that are not Double-Dovetail
Really Right Stuff flash brackets fit lens plates with double-dovetails. Retrofit Kirk and older RRS lens plates with dovetail adapter (requires 5/8-inch of clearance between plate & lens barrel). Use FB-A600 to boost flash bracket up by 6/10-inch.